Chapter 4
.
Installation
GFK-2847
Qui User’s Manual–November 2013
25
4.6 Connectors
4.6.1
Power Connector Pin-out
Interface: 24VDC IN
Connector: Terminal Euro (Tyco Electronics 284539-3 or equivalent)
Mating Connector: (Tyco Electronics 284510-3 or equivalent)
To connect the power supply, refer to 2.3.1 “Connecting Input Power.”
4.6.2
Ethernet
The Qui is equipped with one 10BaseT/100-BaseTX Ethernet port. You can connect
an Ethernet network cable (unshielded, twisted pair, UTP CAT 5) to the unit via the RJ-45
connector on the bottom of the enclosure. LED indicators on the port indicate channel status
(see “Ethernet Port LED Operation” on page 11). The port can be accessed by Windows
Embedded Compact 7 network communications or by your application.
Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
Connector: RJ-45
Pin
Number
Signal
Name
Pin-out
1
TX +
Yellow
Green
8
1
2
TX-
3
RX +
4
NC
5
NC
6
RX-
7
NC
8
NC
4.6.2.1 Setting an IP Address
The Qui provides two methods for setting an IP address:
Summary of Contents for IC754VKI06MTD
Page 5: ......
Page 22: ...Chapter 4 Installation 22 QuickPanel User s Manual November 2013 GFK 2847 ...
Page 35: ......
