![background image](http://html.mh-extra.com/html/ge/humilab/humilab_operators-manual_130247071.webp)
Appendix C — Configuring the RS-232 Interface
Page
67
Computer
connections
In order to communicate with the Electronics Module, you need a
standard serial interface card installed in your computer. If your
computer has one serial card, it is addressed as COM1. If there is a
second serial card, it is addressed as COM2. You must also have a
cable with the following connectors:
• A 9-pin male D-sub connector for the Reference Port
• A 9-pin female D-sub connector for the computer (some com-
puters use a 25-pin connector, requiring an adaptor)