manualshive.com logo in svg

GE GLDT690J__BB, Technical Service Manual, Page: 32 / 33

Share
Download
GE GLDT690J__BB Technical Service Manual Download Page 32

– 32 –

EXCLUSION OF IMPLIED WARRANTIES – Your sole and exclusive remedy is product repair as provided in this 
Limited 

:DUUDQW\$Q\LPSOLHGZDUUDQWLHVLQFOXGLQJWKHLPSOLHGZDUUDQWLHVRIPHUFKDQWDELOLW\RU¿WQHVVIRUD

particular purpose, are limited to one year or the shortest period allowed by law.

This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the 

USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip 
change or you may be required to bring the product to an Authorized GE Service location for service. Proof of original purchase date 
is needed to obtain service under the warranty. In Alaska, the warranty excludes the cost of shipping or service calls to your home.

6RPHVWDWHVGRQRWDOORZWKHH[FOXVLRQRUOLPLWDWLRQRILQFLGHQWDORUFRQVHTXHQWLDOGDPDJHV7KLVZDUUDQW\JLYHV\RXVSHFL¿FOHJDO

rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or 

VWDWHFRQVXPHUDIIDLUVRI¿FHRU\RXUVWDWH·V$WWRUQH\*HQHUDO

For The Period Of: 

GE Appliances Will Replace:

One Year

 

From the date of the 
original purchase

Any part

 of the refrigerator which fails due to a defect in materials or workmanship. 

During this 

limited one-year warranty

.  GE will also provide, 

free of charge

, all labor and  

in-home service to replace the defective part.

:DUUDQWRU*HQHUDO(OHFWULF&RPSDQ\/RXLVYLOOH.<

All warranty service provided by our Factory Service Centers 

or an authorized Customer Care® technician. To schedule 
service, visit us on-line at GEAppliances.com, or call 800.
GE.CARES (800.432.2737). Please have serial number and 
model number available when calling for service. 

What GE Will Not Cover

:

• 

Service trips to your home to teach you how to use 
the product. 

• 

'DPDJHWRWKHSURGXFWFDXVHGE\DFFLGHQW¿UHRU

acts of God.

• 

Improper installation, delivery or maintenance. 

• 

Incidental or consequential damage caused by 
possible defects with this appliance.

• 

Failure of the product if it is abused, misused, 

PRGL¿HGRUXVHGIRURWKHUWKDQWKHLQWHQGHG

purpose or used commercially. 

• 

Cleanning or servicing of the air gap device in the 
drain line.

• 

Replacement of house fuses or resetting of circuit 
breakers. 

• 

Damage caused after delivery.

• 

Product not accessible to provide required service.

Warranty

GE Dishwasher Warranty

Summary of Contents for GLDT690J__BB


































Reviews:

No comments