49-90583-1
9
USING THE W
A
SHER
Getting started
I
PreSoak (on some models)
For soaking your garments prior to the wash cycle. This option begins with a brief tumble
and then proceeds to soak the clothes with water and detergent for a specified period of
time. Once complete, the cycle will begin automatically.
PreSoak
must be selected prior to
pressing
Start
.
The
PreSoak
time will add an additional 30 minutes to the overall wash time. High-efficiency
detergent from the main wash compartment in the dispenser is used for the
PreSoak
period
and main wash cycle.
J
Delay Wash
You can delay the start of a wash cycle for up to 24 hours. Press the
Delay Wash
button to
choose the amount of time you want to delay the start of the wash cycle. Once the desired
time is reached, press the
Start
button. The machine will count down and start automatically
at the correct time.
NOTE:
If you forget to fully close the door, a reminder signal will beep reminding you to do
so.
NOTE:
If you open the door when the delay is counting down, the machine will enter
the pause state. You must close the door and press
Start
again in order to restart the
countdown.
K
Extra Rinse
This option allows for an extra rinse during a cycle to remove excess dirt and detergent from
soiled loads.
On models with
Rinse + Spin
cycle, a drain and spin cycle can be achieved by pressing the
Extra Rinse
button until the light is no longer illuminated.
L
Stain Removal Guide (on some models)
The
Stain Removal Guide
is pre-programmed with the ideal wash and rinse settings to tackle
five common stains. To use this feature, select the desired wash cycle and then press the
Stain
Removal Guide
button until the stain you want to remove is highlighted. Next, press the
Start
button.
For some stains, a prewash will be selected automatically. If desired, add detergent or wash
additive to the prewash dispenser.
Add Steam
cannot be selected along with this feature.
or
(depending
on model)
or
or
M
Time Saver (on some models)
This option reduces the overall washer cycle time by optimizing the wash, rinse and spin
actions and/or gently raising the wash temperature to get clothes cleaned faster. Option is
available on
Normal
,
Whites
,
Towels/Sheets
,
Delicates
,
Bulky Items
and
Active Wear
cycles. Total wash time will vary based on cycle chosen and options selected.
To use:
1. Turn power on and select a wash cycle which has
Time Saver
as an option.
2. Make any adjustments to
Soil
,
Temp
and
Spin
as desired.
3. Press the
Time Saver
button to reduce the overall wash time.
4. Press the
Start/Pause
button.
Stain Wash (on some models)
The
Stain Wash
modifier can be used with all cycles except
Rinse + Spin
and
Tub Clean
and is preprogrammed with the ideal wash and rinse settings to tackle common stains. To use
this feature, select the desired wash cycle and then press the
Stain Wash
button.
Once selected, press the
Start
button to start the cycle. For some stains, a
PreSoak
will be
selected automatically.
(depending
on model)
(depending
on model)
