GE GFDN240ELWW, Service Manual

Page: 97 / 111

Copyright 2011
97
Service Mode Test
How to enter to service mode and navigate:
From idle state, press and alternate between the “My cycle” and “Delay
Start” buttons twice to enter service mode.
Upon entering the service mode, the Control shall be in test selection mode
and display the first test number (t01). Rotating the knob counter clockwise
(CCW) shall decrement the test number in the display. Rotating the knob
clockwise (CW) shall increment the test numbers in the display.
Once the test number is selected, pressing [Start/Pause] shall begin the
selected test.
During a test, pressing power button shall terminate that test and bring the
control to the test selection mode (test number is displayed on the display).
Pressing Power key during the test selection mode shall exit the Service
mode.