GE GE-DS-242-POE, User Manual

Page: 109 / 210

Chapter 4: Web-Based Management
GE-DS-242-PoE Managed Ethernet Switch User Manual 105
OBJECT DESCRIPTION DEFAULT VALUE
Port Set this field if Packet Type is IPv4, else ignore.
0~65535
If UDP port not find in UDP field, you can direct assign
number.
Port Id Source port id, from 1~26, 0 means don’t care. 0
Current List You create ACL and Binding groups.
Non-IPv4 ACL
In Packet Type / Binding box should select Non-IPv4
OBJECT DESCRIPTION DEFAULT VALUE
Group ID 1 ~ 247 (max. 247 ACL group)
Action Permit / Deny.
Permit: Permit packet cross switch.
Deny: Drop packet.
Permit
VLAN Any / VID.
Any: Any VLAN ID.
VID: 1~4094. A certain VLAN ID.
Any
Packet Type IPv4 / Non-IPv4 / Binding
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
IPv4
Ether Type Set this field if Packet Type is Non-IPv4, else ignore.)
Any / ARP(0x0806) / IPX(0x8137)
Any
Type Set this field if Packet Type is Non-IPv4, else ignore.)
0~0xFFFF
If ether type not find in Ether Type field, you can direct
assign number.
Current List You create ACL and Binding groups.