8
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation
Instructions
Care and Cleaning
Reversing the Door (on some models).
Unplug the beverage centre.
Tape the door shut with masking tape and remove the Top Hinge
Cover and the two Screws securing the Top Hinge to the Frame.
Remove the two Screws securing Bottom Hinge Assembly to the
Frame.
Remove the Plug Button from the top left side of the door and
install it in the hinge hole on the right side - press firmly to secure
in place. If already installed move the Door Handle to the other
side.
Hold the door in its closed position and secure the Bottom Hinge
with two Screws.
Install the Top Hinge and Cover on the other side - Make sure the
door is aligned with the beverage centre cabinet before tightening
the screws. Open and close the door, checking the alignment of the
door to the cabinet. If necessary, loosen the screws attaching the
Bottom Hinge to the cabinet, realign the door and retighten the
screws.
Plug in the beverage centre.
Reset the controls to the desired setting.
2
3
4
5
6
7
8
Bottom
Hinge
Hinge Cover
Plug Buttons
or screws
Top
Hinge
Plug Button
1
2
3
C
Consumer Support
