GE LIGHTING - ENTERTAINMENT LIGHTING CATALOGUE
0
Lamp caps
Typical caps used on the Photographic lamps listed in this catalogue are shown below along with
their IEC codes and normal names or common abbreviations. The IEC codes are used in the
majority of table entries. Note that the illustrations are not to scale.
R7s
G6.35 GY6.35
GZ6.35
G7.9 (std. volts)
GX7.9 (Low volts)
Ferrule Contact
Small Indexing Ring
(Ring is a full circle)
E26
E12/15
BA15d
P28/25
E39
5.5 mm
GY5.3 (Flat pins)
BA15s
P30s P30d
P40s
Large Indexing Ring
(Ring is flat opposite pin)
Double Contact
Medium Ring
G17q GX17q
G22
GX5.3 (Round pins)
2 button
GY9.5 GZ9.5
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE
98
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE
99
Lamp Comparison and Construction
Lamps for Ellipsoidal Spotlights
A problem is encountered with some ellipsoidal spotlight luminaires due to the fact that a portion of
the reflected beam of light is directed onto the cap of the lamp designed for Fresnel fittings. This
leads to overheating of the cap and seal which may result in premature lamp failure.
GE have therefore designed lamps intended for use in ellipsoidal spotlights where the size of the cap
has been reduced and the neck length correspondingly increased, thus removing the critical seal
area from the reflected radiation and ensuring that optimum lamp life is obtained.
Linear and ‘U’ Lamps - for Studio Lighting 3200K
Whilst a comprehensive selection of lamps for spotlight fittings is important to the lighting director,
of almost equal importance is a range suitable for the many different fittings now on the market
which use tungsten halogen lamps of tubular construction. GE believe their range gives a wide
choice and is unmatched in performance and reliability.