6
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting
Tips
Consumer Support
About the controls on the air conditioner—models with control knobs.
Features and appearance will vary.
Controls
(on some models)
Mode Control
High Cool, Med Cool
and
Low Cool
provide cooling with different fan speeds .
Fan settings provide air circulation and filtering
without cooling .
NOTE: If you move the mode control from a
cool setting to OFF or to a fan setting, wait
at least 3 minutes before switching back to a
cool setting.
Cooling Descriptions
For Normal Cooling
—Select
High Cool
or
Med
Cool
with the TEMPERATURE control at midpoint .
For Maximum Cooling
—Select
High Cool
with
the TEMPERATURE control at the highest number
available on your knob .
For Quieter and Nighttime Cooling
—Select
Low
Cool
with the TEMPERATURE control at midpoint .
TEMP Control
The TEMP control is used to maintain the room
temperature . The compressor will cycle on
and off to keep the room at the same level of
comfort . When you turn the knob to a higher
number, the indoor air will become cooler . Turn
the knob to a lower number and the indoor air
will become warmer .
MODE CONTROL
TEMPERATURE CONTROL
Controls
(on some models)
ON/OFF Control
Turns air conditioner on and off .
NOTE:
If the air conditioner is off and is then turned
on while set in a
Cool
mode, it will take approximately
3 minutes for the compressor to start and cooling to
begin.
