4
About the controls on the air conditioner—models with touch pads.
Controls
Power Pad
Turns air conditioner on and off . When turned
on, the display will show the room temperature .
Display
Shows the room temperature or time remaining
on the Delay timer . Shows the
Set
temperature
while setting the temperature in
Cool
or
Energy
Saver
modes . The
Set
light will turn on while
setting .
Temp Increase
▲
/Decrease
▼
Pads
Use to set temperature when in
Cool
or
Energy
Saver
mode . The
Set
light will turn on while
setting .
Delay Timer Increase
▲
(+) /Decrease
▼
(–) Pads
Each touch of the
Increase
▲
/ Decrease
▼
pads on the unit or the
Increase
+
/ Decrease
–
pads on the remote control will set the delay
time when using the
Delay 1–24hr
timer ( .
The
Set
light will turn on while setting .
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit
. NOTE:
On the remote
control, use the fan speed
Increase
+
/
Decrease
–
pads to set the fan speeds to
Low
,
Med
or
High
. Use the
Auto
pad to turn
Auto
fan on .
Mode Pad
Use to set the air conditioner to
Cool
,
Energy
Saver
or
Fan Only
mode .
Delay Pads
Delay ON—
When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings .
Delay OFF—
When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours .
How to set:
Press the
Delay 1–24hr
pad on the unit or the
pad on the remote control . Each touch of the
Increase
▲
/ Decrease
▼
pads on the unit or
the
Increase
+
/ Decrease
–
pads on
the remote control will set the timer in
1-hour intervals . The
Set
light will turn on while
setting .
To review the remaining time on the
Delay
1–24hr
timer, press the
Delay 1–24hr
pad on
the unit or the pad on the remote control .
Use the
Increase
▲
/ Decrease
▼
pads on the
unit or the
Increase
+
/ Decrease
–
pads on the
remote control to set a new time if desired .
To cancel the timer,
press the
Delay 1–24hr
pad
until the light on the
Delay 1–24hr
pad goes off .
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Fan
Fan
Delay 1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Remote Control
Delay timer
Increase
Auto Fan
on
Fan speed
Increase
Unit power
on/off
NOTE: The display always shows the
room temperature except when setting
the Set temperature or the Delay timer.
Air Conditioner Controls
Light indicates the
delay timer is set.
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting
Tips
Consumer Support
Light indicates the unit
is in the temperature or
delay time Set mode.
Light indicates the unit
is in the temperature or
delay time Set mode.
Light indicates the
delay timer is set.
(on some models)
(on some models)
