GE Druck DPI 832, User Manual

Page: 10 / 131

[EN] English -
3 K393 Issue 3
To start - Power on or off
To turn the instrument on or off, press ❍ (A1 - item [1]). The
instrument does a self test and then shows the applicable
data.
When the power is off, the last set of configuration options
stays in memory. Refer to “Maintenance”.
To start - Set up the basic operation
Use the Set Up menu to set up the basic operation of the
instrument.
If there is additional data for a menu option, select
Settings ( ■ ■ ) to see the values that are set up. If
necessary, adjust the values.
Table 1: Menu options - Set Up
To start - Select a task (Measure and/or supply)
When the instrument is set up (Table 1), use the Select Task
menu to select the applicable task.
In Table 2/3, IDOS is a Universal Measurement Module
(UMM). If you attach a UMM to the communications port
(A1 - item [9]), the
Select Task menu shows the applicable
IDOS options.
Table 2: Menu options - Select Task
Table 3 shows all the one and two function operations that
are available. If you attach a UMM, you can only use the
options that include IDOS.
Table 3: Permitted 1 and 2 function operations
1
Menu:
Select Task
2 3
Menu:
Set Up
4 5
▲
▼
▲
▼
(Table 2) (Table 1) [
✓
]/[ ]
Options
(If applicable)
Description
To add a series resistor into the mA circuit. You can
then use this instrument together with a HART
®
communicator to set up and calibrate HART
®
devices.
To select and set up the backlight fa timer.
Additional data: Select Settings ( ■ ■ )
To select and set up the power off fa timer.
Additional data: Select Settings ( ■ ■ )
To show the battery level (%).
To set the display contrast (%).
▲ Increases %, ▼ decreases %
To set the time + date. The calibration facility uses
the date to give service and calibration messages.
To set the language option.
To calibrate the instrument.
Additional data: Refer to “Calibration”.
To select and show the applicable status data.
(Software Build, Calibration Due date, Serial
Number, IDOS Information).
1
Menu:
Select Task
2 3
Display:
mA output
▲
▼
(Table 2/3)
Sk1 = Edit
Sk2 = Settings
Options
(If applicable)
Description
mA or
Volts
An input measurement task:
mA - Measure mA (±55 mA)
Volts - Measure volts (±120mV or ±30V)
mA or
Volts An output task:
mA - Supply mA (0 ... 24 mA)
Volts - Supply volts (0 ... 120mV or 0 ... 12V)
mA(24V) Supply mA + the loop power supply is on.
mA(24V) Measure mA + the loop power supply is on.
A switch test.
IDOS UMM only. An IDOS measurement task.
UPM only. A leak test.
To set up the way the instrument works.
Additional data: Refer to: Set Up (Table 1).
Function
mA mA(24V) Volts Volts IDOS
(1) (1) (1) (1) (1)
mA (1) (2) (2) x (2) (2)
mA(24V) (1) (2) (2) x (2) (2)
x (2) (2) x (2) (2)
x x x x x (2)
IDOS (1) (2) (2) (2) (2) x