CHAPTER 4: SOFTWARE
ENERVISTA DGT-UTILITY SETUP SOFTWARE
DGT DISTRIBUTED GENERATION TRIP CONTROL SYSTEM – INSTRUCTION MANUAL
4–45
Press the
Yes
button and the uploading will begin. This process normally takes 20-30
seconds. After it's done, and if the Settings File has been successfully accepted by the
device, you will get another message:
Information in the Online window will be updated accordingly.
Otherwise you will get an error message:
10. The other way to upload to the device is to do this directly, without using an
intermediate Settings File. In the Offline window you can select the desired device’s
node, then select the
Send to Online Device
command from the context menu (right
mouse click):
11. There are some extra features in the Online Window that you may find quite useful
when dealing with the DGT devices:
•
Diagnostic
– gets current settings from the device. These settings can be stored in a
text file and, in case of necessary, sent later to the technical support team.
•
Status
– gets the synchronization status of the device.
•
Logout
– forces system to logout.
12. If you double-click upon the
Diagnostics
node in the Online window, the next window
will appear: