STEP 5
5a. Removal of existing barrier
Remove the barrier between right pole and
mechanism center pole, as shown in Figure 6a
—
Figure 5.
STEP 4
Removing Tie Bar
Use #1 Phillips screw driver to remove the tie bar and
its mounting screws from right pole as
sh
own in
Figu
re
5.
Save th e tie bar a nd its mou
n
ting scre
w
s.
—
Fi gure 6b.
STEP 3
Cover Modification for Wire Exiting
Perform cover modification as shown in Figure 4.
Remove all debris
.
LINE
END
LINE
END
CUT NOTCH IN RIGHT SIDE
LOAD
END
LOAD
END
BARRIER SUPPLIED WITH KIT
REMOVAL OF EXISTING BARRIER
—
Figure 6a.
5b. Installation of Phase Barrier for UVR
Assemble the Phase barrier supplied with kit, as shown
in Figure 6b
2
—
Figure 4b. Side View of Breaker Cover
CUT NOTCH IN RIGHT SIDE
—
Figure 4a. Side View of Breaker Cover
