User Maintenance Instructions
CAUTION: If yours is an electric dryer, before you have it
connected in your new residence, be sure your licensed electrician
confirms that the supply voltage matches the voltage specified on the rating plate.
Dryer Exterior
Wipe off any spills or washing
Dryer control panel and finishes
these pre-treatment products
compounds. Wipe or dust with a
may be damaged by some laundry
away from the dryer. The fabric
damp
Try not to strike the
pre-treatment soil and stain
may then be washed and dried
surface with sharp objects.
remover products if such products
normally, Damage to your dryer
are sprayed on or have direct
caused by pre-treatment products
contact with the dryer.
is not covered by your warranty.
Dryer Drum
Dryer Exhaust
Dryer Storage
The drum is rust-resistant
Inspect and clean the dryer
To store your dryer for a short
and requires no special care.
exhaust
at least once
period of time, disconnect the
a year.
power supply and clean the lint
filter. Do not store the dryer where
it will be exposed to weather.
Lint Filter
Before every
dryer use, clean the
lint filter. Put your
moistened fingers at
one side of the filter
and wipe in a sideways
motion all the way
across to the other side.
Periodically,
remove the lint
filter and insert
the suction hose
from your vacuum
cleaner into
the opening.
Lint Filter
—
Air Circulation
Do not obstruct the flow of
combustion and ventilating
air. The air intake is located
on rear of dryer.
Make sure there is at least
1“ clearance from rear dryer
louvers to the wall.
Wall
1
Minimum
Drum Lamp
BEFORE REPLACING
LIGHT BULB, BE
SURE TO UNPLUG
THE DRYER POWER
CORD. Simply reach
above loading opening
from inside drum.
Remove bulb and
replace with the same
type 10-watt bulb.
11
