HOW TO
YOUR DRYER
WARNING—To reduce the risk of fire, electric shock, or injury to
persons when using your appliance, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
HIGH HEAT
PERM. PRESS
MEDIUM HEAT
LOW HEAT
FLUFF
NO HEAT
Note: End-of-Cycle
and Extra Care Cycle are not available on models
and
Check the Lint Filter
Clean the lint filter each time the dryer is
used. Always
be sure the lint
filter is in place.
Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are sorted right for washing, they’re sorted
right for drying. See the How to Sort the Clothes section. If you do mix various types of fabrics in your load, set
the controls for the lighter-weight fabrics and remove when dry. Reset controls for the remaining heavier fabrics.
the
See Controls Setting Guide.
Selections.
Push a button to select the proper heat for your load.
Drying
Selections
Cottons
High Heat
Perm. Press
Medium Heat
Knits/Del
Low Heat
Should be used with cycles indicated
●
Automatic
Automatic
Perm. Press and
Timed
Regular cycle
Knits Cycles
Cycles
●
●
Cycle Selector.
Turn the Cycle Selector to the desired cycle setting.
selector may be turned in either direction.
6
Extra Care Cycle (on
models).
Operates only with the Automatic Perm.
Press and Knits cycles.
Turn the control knob to ON if desired. To
minimize wrinkle setting in clothes, the Extra
Care cycle provides approximately 15 minutes
of no-heat tumbling after the clothes are dry.
Use End-Of-Cycle Signal if your dryer has one.
Signal will sound at 5-minute intervals to remind
you to remove the clothes.
End-of Cycle Signal (on some models).
Set End-of Cycle Signal, if desired. See
next page.
Start Button.
Press the Push to Start button to start the dryer.
(Opening the door during operation stops the
dryer. To restart, close the door and press the
Push to Start button,)