7
Connect the power and control
connectors of the through wiring
harness.
8
At the beginning of the row, push the
wiring inside the cavity of the bridge.
9
Clip one end-cap at the beginning
of the row and one at the end
(provided in the starter kits).
10
Replace the PSU cover(s) and secure
using the mounting screws.
Note:
When installation is complete,
all lead wires and connectors shall be
totally enclosed.
6
Pull the continuous wiring out of the luminaire being mounted and slide the bridge of the luminaire down onto the bridge of the
already installed luminaire so that the tabs and slots at top and bottom nest into one another. The bridges will engage with a
loud click when fully mated.
6
Pull out continuous wiring
Align tabs
withslots
Push down
toengage
3
4
Toadd a continuous unit to a continuous
5
Remove the PSU cover from
the
previously hung luminaire if present.
run, first suspend the new unit as it is done
in steps 9 and 10 for the independent unit.
Position the non-power-supply end of the
luminaire near the power-supply end of
the previously hung luminaire.
Newunit
Previously
hung unit
Wiring Diagrams
DALI
Fixture
Line
Neutral
Black
White
Ground
Green
DALI
Violet/White
DALI
Violet
Black
White
Green
Violet
Grey
0-10V
Fixture
Line
Neutral
Ground
(0-10V)+
(0-10V)–
5
