14
Push wires into tray and
reattach cover.
13
Reconnect thru wires according
to color (other wires not shown
for clarity).
15
Make sure no wires are pinched.
NOTE:
Make sure all wires and
connectors and are properly
enclosed.
AC wires
(black/white/green)
Dimming wires
(grey/purple)
1
4
3
With a flathead screwdriver,
open access door.
Remove heatsink. Reverse steps
to install the new light engine.
With a flathead screwdriver,
unsnap clip near the end.
Continue unsnapping
remaining clips.
2
Disconnect DCpower.
How To Replace Light Engine in the Field
For LumenCode [42][52][84][A0] Only
13
