background image

– 46 –

Warranty

EXCLUSION OF IMPLIED WARRANTIES – Your sole and exclusive remedy is product repair as provided in this 
Limited 

:DUUDQW\$Q\LPSOLHGZDUUDQWLHVLQFOXGLQJWKHLPSOLHGZDUUDQWLHVRIPHUFKDQWDELOLW\RU¿WQHVVIRUD

particular purpose, are limited to one year or the shortest period allowed by law.

This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the 

USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip 
change or you may be required to bring the product to an Authorized GE Service location for service. Proof of original purchase date 
is needed to obtain service under the warranty. In Alaska, the warranty excludes the cost of shipping or service calls to your home.

6RPHVWDWHVGRQRWDOORZWKHH[FOXVLRQRUOLPLWDWLRQRILQFLGHQWDORUFRQVHTXHQWLDOGDPDJHV7KLVZDUUDQW\JLYHV\RXVSHFL¿FOHJDO

rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or 

VWDWHFRQVXPHUDȺDLUVRȻFHRU\RXUVWDWH·V$WWRUQH\*HQHUDO

For The Period Of: 

GE Will Replace:

One Year 
From the date of the 
original purchase

Any part of the cooktop which fails due to a defect in materials or workmanship. During 

this limited one-year warranty.  GE will also provide, free of charge, all labor and in-
home service to replace the defective part.

Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a GE Factory Service 
technician the ability to quickly diagnose any issues with your appliance and helps GE improve its products by providing GE with 
information on your appliance. If you do not want your appliance data to be sent to GE, please advise your technician NOT to 
submit the data to GE at the time of service.

Warrantor: General Electric Company. Louisville, KY 40225

All warranty service provided by our Factory Service Centers 

or an authorized Customer Care® technician. To schedule 
service, visit us on-line at GEAppliances.com, or call 800.
GE.CARES (800.432.2737). Please have serial number and 
model number available when calling for service.

What GE Will Not Cover (for customers in the United States):

• 

Service trips to your home to teach you how to use 
the product. 

• 

'DPDJHWRWKHSURGXFWFDXVHGE\DFFLGHQW¿UH

ÀRRGVRUDFWVRI*RG

• 

Improper installation, delivery or maintenance. 

• 

Incidental or consequential damage caused by 
possible defects with this appliance. 

• 

Failure of the product if it is abused, misused, 

PRGL¿HGRUXVHGIRURWKHUWKDQWKHLQWHQGHG

purpose or used commercially. 

• 

Service to repair or replace light bulbs, except for 
LED lamps.

• 

Replacement of house fuses or resetting of circuit 
breakers.

• 

Damage caused after delivery, including damage 
from items dropped on the door.

• 

Product not accessible to provide required service.

Summary of Contents for CHP9530*J series















































Reviews: