GE C70, Instruction Manual

Page: 415 / 708

GE Multilin C70 Capacitor Bank Protection and Control System 6-21
6 ACTUAL VALUES 6.3 METERING
6
6.3.7 IEC 61580 GOOSE ANALOG VALUES
PATH: ACTUAL VALUES

METERING

IEC 61850 GOOSE ANALOGS
The C70 Capacitor Bank Protection and Control System is provided with optional IEC 61850 communica-
tions capability. This feature is specified as a software option at the time of ordering. See the
Order Codes
section of chapter 2 for details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
6.3.8 TRANSDUCER INPUTS/OUTPUTS
PATH: ACTUAL VALUES

METERING

TRANSDUCER I/O DCMA INPUTS

DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES

METERING

TRANSDUCER I/O RTD INPUTS

RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
POWER FACTOR PF
BASE
= 1.00
RTDs BASE = 100°C
SOURCE CURRENT I
BASE
= maximum nominal primary RMS value of the +IN and –IN inputs
SOURCE POWER P
BASE
= maximum value of V
BASE
×
I
BASE
for the +IN and –IN inputs
SOURCE THD & HARMONICS BASE = 1%
SOURCE VOLTAGE V
BASE
= maximum nominal primary RMS value of the +IN and –IN inputs

IEC 61850

GOOSE ANALOGS
ANALOG INPUT 1
0.000
MESSAGE
ANALOG INPUT 2
0.000
MESSAGE
ANALOG INPUT 3
0.000
↓
MESSAGE
ANALOG INPUT 32
0.000

DCMA INPUT xx

DCMA INPUT xx
0.000 mA

RTD INPUT xx

RTD INPUT xx
-50 °C
Table 6–2: FLEXELEMENT BASE UNITS (Sheet 2 of 2)