![GE Baker Hughes oxy.IQ User Manual Download Page 21](http://html.mh-extra.com/html/ge/baker-hughes-oxy-iq/baker-hughes-oxy-iq_user-manual_18634021.webp)
Chapter 2. Installation
oxy.IQ User’s Manual
11
2.3 Installing an Oxygen Sensor (cont.)
3.
Apply power to the unit. The screen will display
“INITIALIZING
PLEASE WAIT”
for a few seconds before it begins to display
measurement data.
Note:
Before continuing with the installation, become familiar with the
procedures for programming and calibrating the oxy.IQ
discussed in
Chapter 3, Initial Setup & Operation
.
4.
Trim the 4-20 mA analog output and set the range to 0-25%
oxygen.
5.
Open the airtight package (see
) and remove the
oxygen sensor from the package. To maintain the oxygen sensor’s
energy level, remove the red grounding tab and
immediately
install the sensor in the oxy.IQ
6.
Orient the sensor so that its gold-plated electrodes are facing the
spring-loaded contact pins in the sensor base (see
). Firmly press the oxygen sensor into the sensor base at
the bottom of the oxy.IQ electronics module.
7.
Perform an air calibration on the new oxygen sensor at this time.
On the 0-25% oxygen scale, a properly calibrated oxygen sensor
shows a reading of 20.9% on the display and generates a current
of 17.4 mA at the 4-20 mA analog output terminals.
8.
Using the blue knurled nut, attach the oxy.IQ electronics module
with the calibrated oxygen sensor to the sensor manifold. Rotate
the display as desired and then hand-tighten the blue knurled
nut.
IMPORTANT:
Make sure that the O-ring on the top of the sensor
manifold is in place and undamaged. If necessary,
contact GE for a replacement.
Summary of Contents for Baker Hughes oxy.IQ
