background image

© 2019 Baker Hughes, a GE company, LLC. All rights reserved.

4 | 

=

BHGE

HART® Handheld Communicator ...........................................................................................................................  55

A. SVi1000 Theory  ................................................................................................ 57

Introduction .......................................................................................................................................................................  57

SVi1000 Setups  ...........................................................................................................................................................57
Grounding Practices .................................................................................................................................................58
Compliance Voltage in Single Drop Current Mode .....................................................................................58

B. Optional Switch Load Limits .......................................................................... 59

General Configuration Notes.....................................................................................................................................  59
Optional Retransmit Output.......................................................................................................................................  62

C. Determining an SVI Positioner Compliance Voltage in a Control System
 63

Introduction ..................................................................................................................................................................62

Compliance Test Set-Up ..............................................................................................................................................  63

D. Specifications, Spare Parts and References ............................................... 65

Physical and Operational Specifications..............................................................................................................  65
Spare Parts.........................................................................................................................................................................  71
Hazardous Location Installation and Declaration of Conformity.............................................................  72

Document Changes

Version/Date

Changes

B/01-2012

Updated ES-761 to Rev. B.

C/04-2012

Updated ES-761 to Rev. D.

D/05-2013

Updated Rotary Kit Components.all.

E/09-2013

Updated load limits switch drawing and added a reference to that section in installation. Added 

polarity caution to the Load Limits section. Inserted ES-761 Rev. E.

F/03-2016

Updated load limits section.

Updated wiring and general descriptions to include retransmit wiring and features.

Inserted ES-761 Rev. F.

Updated all references to ValVue to reflect on ValVue version 3, along with licensing changes.

G/03-2017

Add section on Determining Compliance Voltage.

Updated Load Limits section for Flyback diode.

Updated software download sections.

Updated ES to rev. G.

H/12-2017

Updated Load Limits section.

J/01-2018

Updated Load Limits section. Skipped K.

L/06-2019

Updated software installation section.

Added support contact information.

Updated graphics in DO switches section.

Update ES-761 to Rev H.

Summary of Contents for BAKER HUGHES Masoneilan SVi 1000

























































































Reviews: