PANELS.
1.
left window
panel
top and bottom
mounting rails.
2. Slide retainer panel into window filler panel and
attach to cabinet with 2 Type F screws.
Repeat for right side.
Window —
filler panel
c
o
Top mounting rail
Bottom mounting rail
—
Retainer panel
❑
CABINETIN
1.
Cut sealing ribbon to window width and stick it
to bottom of the lower window sash.
2.
Measure and mark center of window sill to
establish mounting position of cabinet.
3. Install cabinet into opening and center on line
marked on window sill. Put top of cabinet toward
you and lower window sash behind top mounting
rail.
Center line
– Sealing
ribbon
(ADHESIVE
SIDE)
4. Extend and secure left and right window filler
panels to window sash with Type A screws, one on
each side.
5. Secure top mounting rail with two Type E screws.
❑
SUPPORTBRACKETS.
1.
Install large adjusting bolts into the support
brackets.
2. Select matching pair of holes on bottom flange
of cabinet, just past the outer edge of sill. Attach left
and right support brackets to bottom flange of
cabinet with 2 Type C screws, ensuring that
locations match.
—--
-. —--
Match holes for
bracket support
3. Level cabinet
by rotating the
Window
adjusting bolt.
Cabinet should
be level or have a
1/8” pitch toward
the outside.
4. Attach a 90°
bracket on each
‘
side of the bottom
Wood
of the cabinet with
Sealing
ribbon
.
Cabinet
Outdoor
II
screw
Type C screws to
Wall
Adjustable bolts
secure the cabinet position in the window. If the
window frame is wood, fasten the lower part of the
brackets to the frame with Type A screws.
(continued next page)
11
