background image

Help us help you...

Before using your air
conditioner, read this book
carefully.

 is 

intended 

 help you operate

 maintain your new air

conditioner properly.

Keep it handy 

 answers   your

questions.

 you don’t understand something

or 

 more help, write (include

your phone number):

Consumer Affairs
GE Appliances
Appliance Park
Louisville, KY 40225

Write down the mode
serial numbers.

and

You’ll find them on   label behind

the 

 grille on the left-hand

side 

 the 

 discharge duct.

These numbers 

 

 on the

Consumer Product Ownership

 

 that 

 with

your 

 conditioner. Before

sending in this card, please write
these numbers here:

Model Number

Serial Number

Use 

 numbers in 

correspondence or service calls
concerning your 

 conditioner.

If you received a damaged
air conditioner...

immediately contact the dealer (or

builder) that sold you the 
conditioner.

Save time and money.
Before you request service...

Check the Problem Solver
section 

 this 

   lists causes

of minor operating problems that
you can correct yourself.

2

SAFETY

Read all instructions before
using this appliance.

When 

using this appliance, always

exercise basic safety precautions,
including the following:

● 

Use this 

appliance 

only for its

intended purpose as described

in this 

Use 

and Care Guide.

● 

This air conditioner must be

properly installed in accordance
with the Instillation Instructions
before it is used. See 
grounding

instructions.

● 

Never unplug your air

conditioner by pulling on the
power cord. 
Always grip plug
firmly and 

 straight out from

the receptacle.

● 

Repair or replace immediately

all electric service cords that
have become frayed or otherwise
damaged. 
Do not use a cord that
shows cracks or abrasion damage
along its length or at either the
plug or connector end.

● 

Unplug your air conditioner

before making any repairs.
Note: We strongly recommend
that any servicing be performed
by a qualified individual.

● 

For your safety.. 

 not store

or use combustible materials,
gasoline or other flammable
vapors or liquids in the vicinity of
this or any other appliance.

SAVE THESE

 you need 

To obtain service, see the
Consumer Services page in the
back of this book.

We’   proud   our service 
want you to be pleased.   for some
reason you 

 not happy with the

service you receive, here 

 three

steps to follow 

 further help.

FIRST, contact the people who
serviced your appliance. Explain
why you 

 not pleased. In most

cases, this will solve the problem.

NEXT, if you are still not pleased,
write 

 the details—including

your phone number—to:

Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225

FINALLY, if your problem is still
not resolved, write:

Major Appliance Consumer

Action Panel

20 North 

 Drive

Chicago, IL 60606

Summary of Contents for AW18

















Reviews: