Window Instillation
(continued)
4. Loosely attach sill bracket to
support bracket, using the carriage
bolt and flange nut.
Sill Bracket
Support -
m\, Bracket
--
Carriage Bolt
Flange Nut
3.
Window
1. Measure distance “X” between
the face of the window stop molding
and the side of the cabinet.
5. Using Type B machine screw and
flange nut, attach support bracket to
the cabinet track. Use track hole
that aligns with the bracket on the
outer edge of the window sill.
Attach sill bracket to window sill
using Type A screws.
2
Face of
Window Stop Molding
Side of Cabinet
Subtract one groove (3/16”) from
Tighten carriage bolt and flange nut.
the “X” measurement to obtain the
required width. Using a sharp knife,
mark the groove until the
panel
Be sure the cabinet maintains its
outward pitch. This allows the air
conditioner to slant slightly
downward on the outside and
prevents water from entering the
room.
Track
Type B
Type A Screw
Hole
Machine Screw
\
and Flange Nut /
Support
\
Carriage Bolt
and Flange Nut
becomes weak enough to break
apart.
“X” Minus One Groove (3/16”)
Filler Panel
3. Insert the cut edge of the filler
panel into the cabinet side seal
groove (position 1). Leave a small
space at the bottom of the cabinet
side seal groove.
Cabinet
Cabinet Side Seal
—
1
—
Rotate the filler panel backward
toward the window frame until the
filler panel clears the window
stool. Push the filler panel down
against the window sill.
Position 3 Position 2
Slide the filler panel out from the
air conditioner cabinet until the
filler panel flange contacts the
window stop molding (position 3).
8
