background image

Air Direction

Two banks of side-to-side air
direction louvers are controlled by
tabs that let you position each bank
separately to discharge air to the
right, to the left or straight ahead.

Two banks of up-and-down air
direction louvers are controlled by

tabs that let you position each bank
separately to discharge air up,
down or straight out.

4

Care and Cleaning

USER 
INSTRUCTIONS

Turn air conditioner off and
remove plug from wall outlet
before cleaning.

Grille & Cabinet

 front 

 with a clean cloth

 

 with mild liquid

 detergent. Wash cabinet

with mild 

 or detergent and

lukewarm 

 -

Condenser Coils

These coils on the weather side
of the unit should be checked
periodically and cleaned if clogged
with dirt or soot from the atmosphere.

If extremely soiled, they may need
to be steam cleaned, a service

available through your GE service
outlet.

front Grille Removal

The front grille can be removed to

make the air 

 accessible, allow

more thorough cleaning or make the
model and serial numbers easier to
read.

To remove the grille, grasp both
sides and pull forward and up to

free tabs on grille from clamps on
frame and bottom edge of grille
from grooved 

 on frame.

To replace the grille, set bottom
edge of grille on grooved supports
on frame and push upper part of
grille back until tabs on grille snap

into clamps on frame.

Air 

The air filter behind the front grille
should be washed at least every 30
days or as often as it needs cleaning.

To remove the filter,  first remove
the front grille, then carefully
unhook the filter from the frame.

Vacuum the filter on the dusty side
to remove 

 dust. Wash the filter.

cleaner side up, under gently flowing
water to wash out accumulated dust
and lint. If the filter is very dirty,
use a mild household detergent in
the wash water. Let the filter dry
thoroughly before replacing it.

After cleaning the filter, put it
back into place and replace the
front grille.

Summary of Contents for AVV15













Reviews: