GE AutoSigma 3000 DL, Technical Reference, Operating Manual

Page: 40 / 68

Setting the number of data fi les
H Note:
This can only be performed when the entire memory
is clear.
With the instrument in the Measurement mode:
Step Key Display
1 Open the fi le menu.
2 Select the number of
fi les required (e.g. 20).
3 Return to Measurement
mode.
H Note:
The number of available fi les is 1 to 50. Increment-
ing or decrementing past these points will result in
the number reverting to the other end of the available
range. The number of storage locations in the fi les will
depend on the number of fi les selected – see the fol-
lowing fi le capacity table.
Data logging
Storage fi le capacity table
No of fi les Locations No of fi les Locations
01 500 26 19
02 250 27 18
03 166 28 17
04 125 29 17
05 100 30 16
06 83 31 16
07 71 32 15
08 62 33 15
09 55 34 14
10 50 35 14
11 45 36 13
12 41 37 13
13 38 38 13
Data logging (internal)
Operation
5 - 10
Issue 04, 06/2007 AutoSigma 3000