GE ArcamEBM Spectra H, Installation Manual

Page: 73 / 85

7
Installation
7 7..5 5..1 10 0 C Co on nn ne ecctt T Th he e C Co oo olliin ng g M Me ed diia a
Connect cooling media supply to the system supply panel. 2 pcs of ½” barb fitting are fitted on ½” female
connectors close to the shut off valves.
1. Cooling media outlet
2. Cooling media inlet
1. Connect the feed hose/pipe to the lower port and
the return hose/pipe to the upper port.
2. Secure hoses with hose clamps.
3. Open the Shut off valves when the cooling media
hose/pipe is connected at both ends.
4. Bleed/drain air in the external system according to
its instructions.
7 7..6 6 M Ma acch hiin ne e S Stta arrttu up p
7 7..6 6..1 1 P Po ow we err U Up p T Th he e M Ma acch hiin ne e
1. Open the Control Cabinet (left hand) side panel to
verify that all circuit breakers are switched on.
2. Turn the main power switch to O ON N position (located
at the rear of the machine).
01 IM-710429 en-GB 69