and
(continued)
Plug-In Units
Plug-in units can be removed.
Lift a plug-in unit about 1“ above
the drip pan—just enough to grasp
it—and you can pull it out.
Do
not lift a plug-in unit more
than l“. If you do, it may not lie
flat on the drip pan when you
plug it back in.
Repeated lifting of the plug-in
unit more than 1“ above the drip
pan can permanently damage
the receptacle.
Terminals
Drip Pan
To replace a plug-in unit:
●
The drip pan must be placed into
the surface
first. Make sure
the opening in the drip pan lines up
with the receptacle.
●
Insert the terminals of the plug-in
unit through the opening in the
drip pan and into the receptacle.
●
Guide the surface unit into place
so it fits evenly in the drip pan.
CAUTION
●
Do not attempt to clean plug-in
surface units in an automatic
dishwasher.
●
Do not immerse plug-in surface
units in liquids of any kind.
●
Do not bend the plug-in surface
unit plug terminals.
●
Do not attempt to clean, adjust or
in any way repair the plug-in
receptacle.
Adjusting Oven
When cooking a
for the
time in your new oven. use time
given on recipes a guide.
thermostats, over a period years,
may “drift” from the factory
setting, and differences in timing
between an old and new oven
5 to 10 minutes are
unusual.
You may be inclined to think that
the new oven is not performing
correctly; however,
oven
has
set
the factory
and is more
to be
than the oven it replaced.
If you think the oven should be
hotter or cooler. you can adjust it
yourself. To decide how
to
change the thermostat, set the oven
temperature
higher lower
than the
in your
recipe, then bake. The results
this “test” should give you an idea
of how much the
should
be changed.
To adjust thermostat:
1. Press BAKE
pad.
2. Select an oven temperature
between
by
pressing the INCREASE pad
immediately press BAKE again
and hold for seconds.
3. Continue to
BAKE until
preset oven temperature
adjustment shows in display. The
factory set oven temperature
adjustment is “00.”
4. Change temperature adjustment
up to degrees hotter
) or
degrees cooler
) by using
the INCREASE or DECREASE
pads.
5. Press
to clear
display.
This adjustment
made to
the oven temperature will be
remembered by the control and
automatically
the oven
temperature by that amount each
time you set a bake temperature.
This adjustment will not
broil temperatures.
24