12
49-5000155 Rev. 1
IMPORTANT:
If the air conditioner has been tilted on its
side, wait 24 hours before turning on the air conditioner to
allow the oil to return to the compressor. This will prevent
the air conditioner from failing prematurely.
• Allow 20” (51 cm) of space around the unit for proper
air circulation.
• Do Not operate the air conditioner without air filters in
place.
• Do not spill liquid on the control panel; it may cause
an electrical short to the interior electronic parts that
would either disable them or cause them to function
improperly.
• When turning on the air conditioner for the first time
after plugging it into an electrical outlet, the unit will
start in Cooling mode set at 75ºF (24°C), and at High
fan speed. The control panel will display the current
room temperature.
• When turning on the unit after previous use, it will
remember the last settings used.
• After a normal shut down, please wait for 3 minutes
before restarting the unit.
• In Cooling mode, this unit should not require water
to be removed. This model has a unique design that
continuously evaporates the water.
• When the unit is operated in high humidity conditions,
you may need to empty the water tank periodically.
• The unit will shut down automatically when the water
tank is full. The Water Full indicator illuminates to alert
you of this condition.
Air Conditioner Use
Air Conditioner Care
WARNING
Electrical Shock Hazard:
• Disconnect power before cleaning.
• Failure to do so can result in death or electrical shock.
Cleaning
1. Unplug or disconnect power.
2. Use only a soft cloth dampened with water to clean the
cabinet.
NOTE:
Do not use a liquid or spray cleaner to clean
the air conditioner.
NOTE:
DO NOT use chemicals, abrasives, ammonia,
chlorine bleach, concentrated detergents, solvents or
scouring pads. Some of these chemicals/items may
damage and/or discolor your air conditioner.
3. Dry thoroughly with a soft cloth.
4. Plug in or reconnect power.
Air Filter
The air filter should be cleaned at least once a week for
your unit to operate at optimum efficiency.
IMPORTANT:
Do Not operate the air conditioner without
the air filter in place.
1. Unplug or disconnect the power.
2. Pull out the filter from the back of the air conditioner.
3. Wash or vacuum the dust from the air filter.
NOTE:
If washed, gently shake the filter to remove the
excess water and dust particles trapped in the filter.
4. Reinstall the filter.
5. Plug in or reconnect power.
Internal Water Tank
The Full indicator illuminates, when the internal water
tank has filled with condensed water.
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Place a shallow 1 quart or larger pan (not included)
below the lower drain located on the back (near the
bottom) of the air conditioner.
3. Remove the cap and the rubber plug and drain the
water tank.
4. Re-insert the drain plug and screw the cap snugly into
place.
5. Plug in or reconnect power.
Storage
If the unit is not being used for a long period of time:
1. Unplug or disconnect power.
2. Drain the water from the water tank. See “Air
Conditioner Care.”
3. Use the original packaging to repack the unit to avoid a
buildup of dust or dirt.
4. Store the air conditioner in a cool, dry location.
AIR CONDITIONER USE /
AIR CONDITIONER CARE
