11
Programming
Program settings for the DGP through the onboard menu. To access this menu, do the following:
1. Press
Menu.
2. Enter
1278
, and press
Enter
.
3. Enter
19
(installer menu) and press
Enter
.
4. Press the
*
key (advanced programming mode).
5. Enter
28
(access remote device programming) and press
Enter
6. Enter
1
(DGP option) and press
Enter
.
7. Enter the address number for the point ID DGP and press
Enter
.
The following programming menus are available and explained in detail in this section:
1. DGP status
2. Device status
3. Device settings
4. Reset settings
5. Learn mode
6. DGP mode
7. Factory defaults
Use the navigation tools shown in
to access the programming options.
Table 4.
Programming navigation tools
Key
Description
* / Menu
Scroll backward within the menu.
# / Enter
Scroll forward within the menu.
0
Exit the menu and scroll to the next menu.
