49-5000525 Rev. 0
5
USING THE
AIR CONDITIONER
Controls
Features and appearance will vary.
Lights beside the touch pads on the air conditioner control panel
indicate the selected settings.
Remote Control
Air Conditioner Controls
1. Power Pad
Turns air conditioner on and off. When turned on, the
display will show the set temperature.
2. Display
Shows the room temperature or time remaining on the
Delay timer. Shows the
Set
temperature while setting
the temperature in
Cool, Dry
or
Eco
modes.
7HPSDQG'HOD\,QFUHDVHޔ'HFUHDVHޕ3DGV
8VHWRVHWWHPSHUDWXUHRUGHOD\WLPH7HPSHUDWXUH
can be set in
Cool, Dry
and
Eco
mode.
4. Mode Pad
8VHWRVHWWKHDLUFRQGLWLRQHUWR
Fan Only, Cool, Dry
or
Eco
mode.
5. Fan Speed Pad
In
Cool
or
Eco
PRGH8VHWRVHWWKHIDQVSHHGWR
Auto, High, Med
or
Low
on the unit.
In
Fan Only
PRGH8VHWRVHWWKHIDQVSHHGWR
High,
Med,
or
Low
on the unit.
6. Timer Pad
(set by remote control only)
Timer ON —
When the air conditioner is off, it can be
set to automatically come on in 0.5 to 24 hours at its
previous mode and fan settings.
Timer OFF —
When the air conditioner is on, it can
be set to automatically turn off in 0.5 to 24 hours.
How to set:
Press the
Timer
pad on the remote control. Each
touch of the
+
±
pads on the remote control will set
the timer intervals.
To review the remaining time on the
Timer
, press the
Timer
SDGRQWKHUHPRWHFRQWURO8VHWKH
±
pads
on the remote control to set a new time if desired.
To cancel the timer,
press
±
pad on the remote
control until the set time is zero or press the
Timer
for
3 seconds.
7.
Sleep Pad
The
SLEEP
mode sets the unit to gradually change
VHWWLQJVRYHUDQKRXUSHULRGWRDOORZIRUVRPH
increased energy efficiency during sleep hours.
The
SLEEP
mode is available only in
COOL
and
FAN
only settings.
Press the
SLEEP
mode pad and its light will
illuminate. The fan indicator will stay at the same
setting but the air conditioner will automatically
change the
FAN
speed to low in either
COOL
or
FAN
only mode.
In
FAN
only mode, the fan will stay in the
LOW
speed
VHWWLQJIRUKRXUV$IWHUKRXUVWKHDLUFRQGLWLRQHU
will resume the settings that were in place before the
SLEEP
mode pad was pressed.
In
COOL
mode, the fan will stay in the
LOW
speed
VHWWLQJIRUKRXUVIURPWKHWLPHWKH
SLEEP
mode
pad was pressed. The air conditioner will also raise
the set point 2
°
F in 30 minutes and 2
°
F more in
another 30 minutes where it will remain for the next
KRXUV$IWHUKRXUVWKHDLUFRQGLWLRQHUZLOOUHVXPH
the settings that were in place before the
SLEEP
mode pad was pressed.
While the unit is in
SLEEP
mode, pressing any pad
will return it to the settings that were in place before
the
SLEEP
mode pad was pressed.
8.
Filter Reset Pad
This feature automatically notifies you that the air filter
must be cleaned. The indicator light will come on after
240 hours of operation. Clean the air filter (refer to
page 6), place it back in the front panel, and press the
Filter Reset
pad. The light will go off.
9. WiFi Connect Pad
Enables connection of the air conditioner to the home
WiFi. Download App for details at:
*($SSOLDQFHVFRPFRQQHFW
.
10. Turbo Pad
Sets the unit to run in cool mode at the lowest temp setting
with high fan speed for 1 hour.
11. Eco Pad (set by remote control only)
Sets the air conditioner specifically to Eco Mode.
1
2
7
4
5
10
3
9
8
1
6
10
4
5
7
3
11
Summary of Contents for AKLK18
Page 18: ... 49 5000525 Rev 0 Notes ...
Page 38: ... 49 5000525 Rev 0 Notas ...
