COOL MODE
Remote Control
1. Press
COOL
pad.
2. Press
LOW
or
HIGH
pads to set desired fan speed.
3. Press the
,1&5($6('(&5($6(²
pads to set the desired
temperature 60°F to 85°F in 1°F increments.
Control Panel
1. Press the
MODE
pad until the
COOL
indicator light is lit.
2. Press the
FAN
pad until
HIGH
or
LOW
indicator light is lit for desired
fan speed.
3. Press the
,1&5($6('(&5($6(²
pads to set the desired
temperature 60°F to 85°F in 1°F increments.
A thermostat is used to maintain the room temperature. The
compressor will cycle on and off to keep the room at the set level of
comfort. Set the thermostat at a lower number and the indoor air will
become cooler.
Set the thermostat at a higher number and the indoor air will become
warmer.
NOTE:
If the air conditioner is off and is then turned on while set to
COOL
, it will take approximately 3 minutes for the compressor to start
and cooling to begin.
Cooling Descriptions
)RU1RUPDO&RROLQJ³
Select the
COOL
mode and
HIGH
fan with a
middle set temperature.
)RU0D[LPXP&RROLQJ³
Select the
COOL
mode and
HIGH
fan with a
lower set temperature.
)RU4XLHWHUDQG1LJKWWLPH&RROLQJ³
Select the
COOL
mode and
LOW
fan with a middle set temperature.
NOTE: There will be a 3-minute delay between setting changes such
as COOL to OFF and back to COOL.
FAN
Use the
FAN
to provide air circulation and filtering without cooling or
heating. Since fan only settings do not provide cooling or heating, a
temperature setting will not be displayed.
Remote Control
Press
FAN
pad. Press
LOW
or
HIGH
pads to set desired fan speed.
Control Panel
Press the
MODE
pad until the
FAN
indicator light is lit and the
LOW
or
HIGH
indicator light is lit for the desired fan speed.
HEAT MODE
Remote Control
1. Press
HEAT
pad.
2. Press
LOW
or
HIGH
pads to set desired fan speed.
3. Press the
,1&5($6('(&5($6(²
pads to set the desired
temperature 60°F to 85°F in 1°F increments.
Control Panel
1. Press the
MODE
pad until the
HEAT
indicator light is lit.
2. Press the
FAN
pad until HIGH or LOW indicator light is lit for desired
fan speed.
3. Press the
,1&5($6('(&5($6(²
pads to set the desired
temperature 60°F to 85°F in 1°F increments.
A thermostat is used to maintain the room temperature. The heater will
cycle on and off to keep the room at the set level of comfort. Set the
thermostat at a higher number and the indoor air will become warmer.
Set the thermostat at a lower number and the indoor air will become
cooler.
NOTE:
If the air conditioner is off and is then turned on while set to
HEAT
, it will take approximately 1 minute for the heater to start and
heating to begin.
Heating Descriptions
)RHDWLQJ³
Select the Heat mode and
HIGH
fan with a
middle set temperature.
)RU0D[LPXP+HDWLQJ³
Select the
HEAT
mode and
HIGH
fan with a
higher set temperature.
)RU4XLHWHUDQG1LHDWLQJ³
Select the
HEAT
mode and
LOW
fan with a middle set temperature.
7
