background image

YOUR GE ROOM AIR CONDITIONER

WARRANTY

I

Save proof of original purchase date such as your sales slip or 

 check to establish warranty period.

II

WHAT IS COVERED

FULL ONE-YEAR WARRANTY

For one year from date of original
purchase, we will provide, free of

charge, parts and on-site service
labor to repair or replace any 

part

of 

 room air conditioner  that

fails because of a manufacturing
defect.

FULL FIVEWEAR WARRANTY

For five years from the date of

original purchase, we will provide,
free of charge, parts and on-site
service labor to repair or replace
any 

 of 

 sealed refrigerating

 (the compressor, condenser,

evaporator and all connecting
tubing) that fails because of a

manufacturing defect.

 each of 

 above warranties:

Transportation expense to and
from a service shop and shop
service labor if required will be
free of charge.

This warranty is extended to
the original purchaser and any
succeeding  owner for products
purchased for use in the 48 mainland
states, Hawaii and Washington, 

In Alaska the warranty is the same

except that it is LIMITED because you
must pay to ship the product to the
service shop or for the service
technician’s travel costs to your home.

All warranty service will be provided
by our Factory Service Centers or
by our authorized Customer 
servicers during normal working
hours.

Look in the White or Yellow Pages

of your telephone directory for
GENERAL ELECTRIC COMPANY,
GENERAL ELECTRIC FACTORY
SERVICE, GENERAL 

 FACTORY SERVICE or

GENERAL ELECTRIC CUSTOMER
CARE

SERVICE.

WHAT IS NOT COVERED

● 

Service trips to teach you how to

use the product.

Read your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our

Consumer Affairs office at the
address below, or call, toll free:

GE Answer 
800.626.2000
consumer information service

● 

Improper installation,

If you have an installation
problem, or if the air conditioner
is of improper cooling or heating

capacity for the intended use,
contact your dealer or installer.
You are responsible for providing
adequate electrical connecting
facilities.

. Replacement of fuses or

resetting of circuit breakers.

. Failure of the product resulting from
modifications to the product or due to

unreasonable use including failure to
provide reasonable and necessary
maintenance.

. Failure due to corrosion on models
not corrosion-protected.

● 

Damage to the product caused

by improper power supply voltage,

accident, fire, floods or acts of God.

● 

In commercial locations labor

WARRANTOR IS  NOT RESPONSIBLE

 to move the unit to a

FOR CONSEQUENTIAL DAMAGES.

location where it is accessible for
service by an individual technician.

Some 

states 

do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: General Electric Company

If further help is needed concerning this warranty, write:

Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225

 Pub. 

 

10-90 

 

 

 

 AJM1OA

AJ81OA 

 AJM1OD

Printed In Singapore

Summary of Contents for AJ806L

















Reviews: