49-5000633 Rev. 1
7
USING THE
AIR CONDITIONER
Using the Remote Control
Remote Control may differ in appearance from the image
show.
NOTE:
Please remove the back of the controller and
insert two AAA batteries. Replace batteries after 6
months of use or when remote control starts to lose
power.
NOTE:
DO NOT
mix old and new batteries.
1. POWER
Press the
POWER
button to turn on the air
conditioner. When you first press the power button,
the air conditioner will operate in Energy Save mode,
Quiet fan speed and temperature of 72°F. You can
select any other mode to satisfy your needs .
2. SPEED
High
- Press
HIGH
button to choose high fan speed.
Med
- Press
MED
button to choose medium fan
speed.
Quiet
- Press
QUIET
button to choose quiet fan
speed.
Auto Cool
- Press
AUTO
button to choose auto cool
fan speed.
3. MODE
Fan -
Press the
FAN
button to activate fan mode.
Cool -
Press the
COOL
button to activate cool mode.
Energy Save -
Press the
ENERGY SAVE
button to
activate fan mode.
Dehum -
Press the
DEHUM
button to activate dehum
mode.
4. TIMER
To set the air conditioner to turn off after a set
amount of time between 1 hour and 24 hours (unit
must be ON):
1. Press
TIMER ON/OFF
button on the remote
control to select the time off function.
2. Press the
TIMER +
or
TIMER –
arrow button to
change the delay time from 1 hour to 24 hours.
Timer OFF indicator light on the air conditioner
panel will illuminate.
3. The buzzer beeps twice after 5 seconds, then
Timer OFF countdown will initiate.
To clear TIMER Program:
NOTE:
Air conditioner can be either on or off.
Press
TIMER ON/OFF
button until Timer indicator
light turns off.
5. TEMP UP/TEMP DOWN
• Press the
TEMP +
button to raise the temperature.
Each time you press the
TEMP +
button, the
temperature will go up 1° F until it reaches 86°F
(30°C).
• Press the
TEMP –
button to lower the temperature.
Each time you press the T
TEMP –
button, the
temperature will go down 1° F until it reaches 61°F
(16°C).
6. SLEEP
1. Press
SLEEP
button on the remote control to
choose Sleep mode. This display will show (08)
and the indicator light will turn on.
2. The temperature will increase by 2° F one hour
after the mode is chosen. The temperature then
increases another 2° F after one hour. The until
will hold this temperature for six hours then stop.
3. To turn off Sleep mode, press the
SLEEP
button
until the indicator light is off.
7. FAHRENHEIT/CELSIUS
• Press the
F/C
button to choose between Fahrenheit
and Celsius.
8. LOCK
• Press the
LOCK
button on the remote control to
disable button functionality. Press the
LOCK
button
again to activate the remote control functionality.
9. LIGHT
• When you press the
LIGHT
button, the display on
the unit will turn off, but the unit is still operating
normally. When you press the
LIGHT
button again
or press any button on the remote control, the
display will be illuminated again.
10. RESET
• Press the
RESET
button to reset the unit to factory
settings.
DEHUM
TIMER
UP
SLEEP
LOCK
TIMER
ON/OFF
F/C
TIMER
DOWN
LIGHT
RESET
TEMP DOWN
QUIET
HIGH
MED
AUTO
COOL
FAN
ENERGY
SAVE
TEMP UP
Controls
