background image

Electrical 

 Read Carefully.

How to connect
electricity

For personal safety, this
appliance must be properly
grounded.

The power cord of this appliance
is equipped with a three-prong
(grounding) plug which mates with
a standard three-prong (grounding)
wall outlet (Fig. 1) to minimize the

possibility of electric shock hazard
from this appliance.

PREFERRED ,
METHOD

 

 

INSURE PROPER

 EXISTS

BEFORE USE

 

 1 

Have the wall outlet and circuit
checked by a qualified electrician
to make sure the outlet is properly
grounded.

Where a standard two-prong
wall outlet is encountered, it is
your personal responsibility and
obligation to have it replaced with
a properly grounded three-prong
wall outlet.

DO NOT, UNDER 

 CUT

OR 

 THE 

 PRONG 

THE 

 CORD.

Use of adapter plug

 units)

Because of potential safety
hazards under certain conditions,
we strongly recommend against use
of an adapter plug. However, if you
still elect to use an adapter, where
local codes permit, a 

 maybe made to a

properly grounded {we-prong wall
outlet by use of a 

 listed adapter

(Fig. 2) available at most local
hardware stores.

TEMPORARY METHOD

 

 PLUGS NOT

P

I

ON

Fig. 2

BEFORE 

The larger slot in the adapter must
be aligned with the larger slot in
the wall outlet to provide proper
polarity in the connection of the
power cord.

 Attaching   adapter

ground terminal to 

 outlet cover

screw does not ground appliance
unless cover screw is metal, and
not insulated, and wall outlet is
grounded through house wiring. You
should have circuit checked by a
qualified electrician to make sure
the outlet is properly grounded.

When disconnecting the power
cord from the adapter, 
always
hold the adapter with one hand. If
this is not done, the adapter ground
terminal is very likely to break with
repeated use.

Should the adapter ground
terminal 

 DO 

 USE the

appliance until a proper ground
has again been established.

3

Use of 

 cords

not recommended

Because of potential safety
hazards under certain conditions,
we strongly recommend against the
use of an extension cord. However,
if you 

 

 to use an extension

cord, it is absolutely necessary that
it be a 

 listed 3-wire grounding

type appliance extension cord having
a grounding type plug and outlet
and that the electrical rating of the
cord be 15 amperes (minimum) and

120 volts.

Summary of Contents for AHD15









Reviews: