Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
13
Install the Air Conditioner in the Window
Center the air conditioner in the window with
the bottom mounting rail between the window
stool and the bracket.
Close the window. Make sure the window sash
is behind the top mounting rail of the air
conditioner. It should be level or slightly tilted
to the outside. Use a level; about 1/3 bubble
will be the correct case slant to the outside.
Extend the sliding panels to fill the window
opening and use 4 type A screws to secure
them, 2 on each side.
C
B
A
5
Type A
screws
Type A
screws
Outside
Safety brackets
1/3 bubble
Window
Top mounting rail
Bottom
mounting rail
Install the Window Gasket and the Safety Bracket
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from getting
into the room.
Seal any air leaks around the air conditioner
and the window with gum-type sealer.
Attach the bracket with a type B screw.
D
C
B
A
6
