Installation Instructions
5
A
B
2 Frame locking brackets
35(3$5(7+(:,1'2:
&XWWKHZLQGRZVDVKVHDOWRWKHSURSHUOHQJWK
3HHORIIWKHEDFNLQJDQGDWWDFKWKHVHDOWRWKH
XQGHUVLGHRIWKHZLQGRZVDVK
6
,167$//6833257%5$&.(7$1'
)2$0723:,1'2:*$6.(7
Cut the foam top window gasket to the window
width.
Stuff the foam
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
A
CAUTION:
To prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the window locking
bracket to the window
side jamb with one screw
.
B
C
:RRG
Vinyl
6FUHZV
C
10
,167$//7+($,5&21',7,21(5,1
7+(:,1'2:
Place the air conditioner on the sill with the
bottom mounting rail against its back edge.
Center it and close the window securely behind
the top mounting rail.
It should be level or slightly tilted to the outside.
Use a level; about a 1/3 bubble will be the correct
case slant to the outside.
Extend the left and right accordion panels to
the vertical window sashes and attach 3 screws
through the holes in the upper panels, as
appropriate.
Install the frame locking brackets between the
bottom of the accordion panel and the window
sill. Attach with 2 screws.
NOTE:
To prevent the
window sill from splitting, drive the pilot holes
before driving the screws.
Summary of Contents for AER10 Series
Page 24: ...24 Notes ...
