4
About the controls on the air conditioner.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Fan
Fan
Delay 1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Delay
timer
Increase
Auto Fan
on
Fan speed
Increase
Unit power
on/off
Air Conditioner Controls
Controls
Power Pad
Turns air conditioner on and off. When
turned on, the display will show the room
temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the
Set
temperature
while setting the temperature in
Cool
or
Energy
Saver
modes. The
Set
light will turn on while
setting.
Temp Increase
Ÿ
/Decrease
ź
Pads
Use to set temperature when in
Cool
or
Energy Saver
mode. The
Set
light will turn on
while setting.
Delay Timer Increase
Ÿ
(+) /Decrease
ź
(–) Pads
Each touch of the
Increase
Ÿ
/
Decrease
ź
pads on the unit or the
Increase
+
/
Decrease
–
pads on the remote control will set the delay
time when using the
Delay 1–24hr
timer. The
Set
light will turn on while setting.
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit.
NOTE:
On the remote
control, use the fan speed
Increase
+
/
Decrease
–
pads to set the fan speeds to
Low,
Med
or
High
. Use the
Auto
pad to turn
Auto
fan on.
Mode Pad
Use to set the air conditioner to
Cool, Energy
Saver
or
Fan Only
mode.
Delay Pads/Delay 1-24hr Pad
'HOD\21³
When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
'HOD\2))³
When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the
Delay 1–24hr
pad on the unit or the
Delay pad
on the remote control. Each touch
of the
Increase
Ÿ
/
Decrease
ź
pads on the
unit or the
Increase
+
/
Decrease
–
pads on
the remote control will set the timer in 1-hour
intervals. The
Set
light will turn on while setting.
To review the remaining time on the
Delay
1–24hr
timer, press the
Delay 1–24hr
pad on
the unit or the
Delay pad
on the remote control.
Use the
Increase
Ÿ
/
Decrease
ź
pads on the
unit or the
Increase
+
/
Decrease
–
pads on the
remote control to set a new time if desired.
To cancel the timer,
press the
Delay 1–24hr
pad
until the light on the
Delay 1–24hr
pad goes off.
Reset Filter
LED will turn on when fan has accumulated 250
hours of run time as a reminder to clean filter.
Press
Reset Filter
to turn off the LED and reset
the accumulated run time.
Note:
The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to
degree Celcius (°C), press the Temp Increase
Ÿ
and Temp Decrease
ź
buttons together and hold for 3
seconds. Repeat the process to change back to degree Fahrenheit (°F)
NOTE:
The display always shows the room temperature except
when setting the Set temperature or the Delay timer.
Power
On/Off
Fan
Mode
Auto
Reset
Filter
High
Med
Low
Cool
Fan Only
Energy Saver
Delay
1-24 Hrs
Set
+
-
8
Light indicates the
delay timer is set.
Light indicates the unit is in the
temperature or delay time Set mode.
Remote Control
Summary of Contents for AEH12AR
Page 24: ...24 Notes...
