GE AEH08 Series, Owner'S Manual And Installation Instructions

Page: 5 / 36

49-7808
5
USING THE
A
IR CONDITIONER
Controls
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Controls
Power Pad
Turns air conditioner on and off. When turned on,
the display will show the room temperature.
Display
Shows the room temperature or time remaining on
the Delay timer. Shows the
Set temperature while
setting the temperature in Cool or Energy Saver
modes. The Set light will turn on while setting.
7HPS,QFUHDVHŸ'HFUHDVHź3DGV
8VHWRVHWWHPSHUDWXUHZKHQLQ
Cool or Energy
Saver mode. The Set light will turn on while
setting.
'HOD\7LPHU,QFUHDVHŸ'HFUHDVHź±
Pads
Each touch of the
,QFUHDVHŸ'HFUHDVHź
pads on the unit or the
,QFUHDVH'HFUHDVH±
pads on the remote control will set the delay time
when using the
'HOD\±KU
timer. The Set light
will turn on while setting.
Fan Speed Pads
8VHWRVHWWKHIDQVSHHGWR
Low, Med, High or
Auto on the unit. NOTE: On the remote control,
use the fan speed
,QFUHDVH'HFUHDVH±
pads
to set the fan speeds to Low, Med or High
8VH
the Auto pad to turn Auto fan on.
Mode Pad
8VHWRVHWWKHDLUFRQGLWLRQHUWR&RRO(QHUJ\
Saver or Fan Only mode.
'HOD\3DGV'HOD\KU3DG
Delay ON —When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF —When the air conditioner is on, it can
be set to automatically turn off in 1 to 24 hours.
How to set:
Press the Delay 1–24hr pad on the unit or the
Delay pad on the remote control. Each touch of
the
,QFUHDVHŸ'HFUHDVHź
pads on the unit or
the
,QFUHDVH'HFUHDVH±
pads on the remote
control will set the timer in 1-hour intervals. The
Set light will turn on while setting.
To review the remaining time on the
'HOD\±KU
timer, press the
'HOD\±KU
pad on the unit
RUWKH'HOD\SDGRQWKHUHPRWHFRQWURO8VHWKH
,QFUHDVHŸ'HFUHDVHź
pads on the unit or
the
,QFUHDVH'HFUHDVH±
pads on the remote
control to set a new time if desired.
To cancel the timer, press the
'HOD\±KU
pad
until the light on the
'HOD\±KU
pad goes off.
Reset Filter
LED will turn on when fan has accumulated 250
hours of run time as a reminder to clean filter.
Press
Reset Filter to turn off the LED and reset
the accumulated run time.
Fan Fan
Delay
1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and
Decrease
Delay
timer
Increase
Auto Fan
on
Fan
speed
Increase
8QLW
power
on/off
Air Conditioner Controls
NOTE: The display always shows the room temperature
except when setting the Set temperature or the Delay timer.
Power
On/Off
Fan Mode
Auto
Reset
Filter
High
Med
Low Cool
Fan Only
Energy Saver
Delay
1-24 Hrs
Set
+
-
8
Light indicates the
delay timer is set. Light indicates the unit is in the
temperature or delay time Set mode.
Remote Control
Note: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to degree Celcius (°C),
press the Temp Increase
Ÿ
and Temp Decrease
ź
buttons together and hold for 3 seconds. Repeat the process to change back
to degree Fahrenheit (°F)