GE Advantium 120 SCA1000 Technical Service Manual Download Page 39

Page: 39 / 74

– 37 –

GEA01006

Screws

5. Remove 7 screws from the exhaust duct and

position to access the heat shield.

GEA01004

Screws

Heat Sheild

6. Remove 2 screws, heat shield, and insulation.

GEA01017

Screws

7. Remove 8 screws from the heater cover and

position to access the heaters.

GEA01008

Metal Tabs

Halogen

Heater

Ceramic

Heater

Heat

Reflector

8. Disconnect the heater wiring.

Caution: Do not touch the halogen heater with
bare hands. Touching the halogen heater with
bare hands may cause heater failure.

9. Straighten metal tabs and remove all remaining

screws and the heater assembly.

GEA01009

Sheath Heater

Wire Leads

10. Remove the sheath heater.

Thermistor

1. Remove the outer case (see procedure).

2. Disconnect the thermistor wiring from the

PCB.

GEA01004

Screws

Heat Sheild

3. Remove 2 screws, heat shield, and insulation.

Summary of Contents for Advantium 120 SCA1000











































































Search results

Summary of Contents for Advantium 120 SCA1000

Reviews:

Related manuals for Advantium 120 SCA1000

Brands by name

Popular brands

GE Advantium 120 SCA1000, Technical Service Manual

Search results

Summary of Contents for Advantium 120 SCA1000

Reviews:

Related manuals for Advantium 120 SCA1000

Brands by name

Popular brands