43
5. Press SELECT button again to confirm and the display shows
ENTER NAME
.
6. Repeat Steps 6 through 13 in the section Adding Phone Book Entries, except
instead of entering the number as indicated in Step 8, the dialed number shows
on the display.
NOTE: If the phone book has 50 entries,
FULL
shows on the display
and you must delete a record before adding a new one.
NOTE: If the dialed number is longer than 20 digits, it cannot be
stored.
Inserting a Pause in the Dialing Sequence
(of a Stored Number)
Press the #PAUSE button on the handset to insert a delay in dialing sequence of a
stored number when a pause is needed to wait for a dial tone (for example, after you
dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts
as one digit in the dialing sequence.
You can press the #PAUSE button to insert a P (pause) when you enter the telephone
number when adding a phone book entry.
Reviewing Phone Book Records
1. Make sure your phone is
OFF
(not in talk mode).
. Press the MENU button and use the
6
or
5
button to scroll to
PHONE BOOK
.
3. Press the SELECT button to enter the phone book.
NOTE: You may press the PHONEBOOK button to shortcut to the
phone book, too.
4. Use the
6
or
5
button to scroll the records
- OR -
Press the number keys to go to the name of the records started with the
corresponding character.
NOTE: Your phone book records are sorted automatically in
alphabetical order.
5. Press the SELECT button to view the details of the record.
6. Use the
6
or
5
button to view the picture ID set, if any.
