Leader cable to LED fixture
Gray (-0-10V)
Blue (+0-10V)
Black (+)
White (-)
Green (ground)
120-277V
AC Line
Dimmer
Leader cable to LED fixture
Gray (-0-10V)
Black (+0-10V)
Brown (+)
Blue (-)
Green/yellow
(ground)
240 VAC
Line
Dimmer
Snap in LED fixture
Install mounting track inside the
wall cavity using a minimum
of two #10 (M5) self-tapping
flathead screws per section. If
required, cut mounting track to
desired length.
Assemble the LED fixture and
the bracket by pressing them
together.
Connect the leader cable to the power source and dimmer.
OPTIONAL:
If dimming is not used, cap the purple and gray wires with UL approved wire connectors. Do not connect the
wires together.
Continue placing fixtures, being
sure to join plugs male to female.
Attach jumper cables as needed
to work around any obstacles,
corners or separations.
1
2
Snap the first LED fixture into the
mounting track.
4
Connect the leader cable to the
male plug on the first LED fixture.
3
5
6
Leader cable
Installation
Electrical Connections
Orient plugs male to female
Place end cap from leader cable
on the electrical plug of the last
fixture in the run.