GE 5483518 Basic Service Manual Download Page 50

Page: 50 / 427

Introduction

1-26

LOGIQ e – Basic Service Manual

5461614-100 English Rev. 6

Battery Safety

To avoid the risk of injury, follow the warning and cautions to
make sure that the battery does not burst, ignite, or generate
heat of fumes.

WARNING

•

The battery has a safety device. Do not disassemble or
alter the battery.

•

Charge and discharge the batteries only when the ambient
temperature is between 10

and 40

C (50

F and 104

F).

•

Do not short-circuit the battery by directly connecting the
negative terminals with metal objects.

•

Do not heat the battery or discard it in a fire.

•

Do not expose the battery to temperature over 50

(122

F). Keep it away from fire and other heat sources.

•

Do not charge the battery near a heat source, such as a
fire or heater.

•

Do not leave the battery in direct sunlight.

•

Do not drop packs from height to prevent them from
possible malfunction damage.

•

Do not drop packs from height to prevent them from
possible malfunction damage.

•

Do not pierce the battery with a sharp object, hit it, or step
on it.

•

Do not use a damaged battery.

•

Do not solder a battery.

•

Do not connect the battery to an electrical power outlet.

•

Do not contact PCM (Power Control and Monitor, it’s a
small board in the battery) directly to prevent packs from
ESD damage.

•

In case of longer non-use of the LOGIQ e, please make
sure the battery is removed.

Summary of Contents for 5483518











































































































































































































































































































































































































































Search results

Summary of Contents for 5483518

Reviews:

Related manuals for 5483518

Brands by name

Popular brands

GE 5483518, Basic Service Manual

Search results

Summary of Contents for 5483518

Reviews:

Related manuals for 5483518

Brands by name

Popular brands