GE 5151481-3 Operator'S Manual Download Page 210

Page: 210 / 240

Chapter A7: Set Preferences

Definium AMX 700 X-Ray System

5161515-1EN

Rev. 6 (10 February 2008)

A7-50

Operator Manual

NOTE:

If reusing the existing name, be sure to include any underscores in the title.

4. Select the

position

on the Category list.

5. Press [OK].

6. Continue with

Copy Exam

(p. A7-50).

Copy Exam

1. Select the Exam to copy.

2. Press [COPY EXAM].

3. Enter the new name to use or retype the existing name.

4. Select the

Category

to copy to.

5. Select the position on the

Exam

list.

6. Press [OK].

7. Continue with

Copy View

(p. A7-50).

Copy View

1. Select the View to copy.

2. Press [COPY VIEW].

3. Enter the

Exam Name

to use or retype the existing name.

4. Select the

Copy to Category

from the list.

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Summary of Contents for 5151481-3

















































































































































































































































Search results

Summary of Contents for 5151481-3

Reviews:

Related manuals for 5151481-3

Brands by name

Popular brands

GE 5151481-3, Operator'S Manual

Search results

Summary of Contents for 5151481-3

Reviews:

Related manuals for 5151481-3

Brands by name

Popular brands