GE 5151481-3 Operator'S Manual Download Page 156

Page: 156 / 240

Chapter A6: Image Management

Definium AMX 700 X-Ray System

5161515-1EN

Rev. 6 (10 February 2008)

A6-11

Operator Manual

1. If necessary, create a Worklist procedure entry for the patient with the appropriate information.

a) On the Worklist screen, click [ADD PATIENT].
b) Enter the patient’s information. Refer to

Chapter A3: Worklist-Add / Edit Patient Information

(p. A3-

15) for more information.

c) Click [SAVE].

2. On the Image Management screen, select the exam to copy.

3. Switch the [IMAGE TOOLS] button to COPY EXAM, if necessary.

The Copy Exam screen appears.

The Copy Exam screen shows all Worklist entries with the status of “Scheduled”, “Discontinued”, or
“Suspended”.

4. Search or Filter the exam list to locate the destination exam.

5. Select the exam where you want the images copied to.

6. Press [OK].

A message appears: “Images will be copied to the selected exam. Images will not automatically be
removed from the source exam. The destination exam will be marked as Completed.”

7. Click [OK].

The message closes.

A message appears: “Copying Images”

[CANCEL] stops the copy process, closes the message, and returns you to the Image Management
screen.

All series and images are copied to the exam.

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Summary of Contents for 5151481-3

















































































































































































































































Search results

Summary of Contents for 5151481-3

Reviews:

Related manuals for 5151481-3

Brands by name

Popular brands

GE 5151481-3, Operator'S Manual

Search results

Summary of Contents for 5151481-3

Reviews:

Related manuals for 5151481-3

Brands by name

Popular brands