GE 4 Series, User Manual

Page: 67 / 72

Concord 4 Series Security Systems 57
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press
B
until the
display reads “SYSTEM MASTER CODE” or “SYS MASTER,” then press
#
.
4. Replace the existing code with the new 4 digit System Master Code then press
#
.
5. Press
*
+
00
+
#
to exit the programming menus.
Using Programming Shortcuts
A programming shortcut is a number that “jumps” you to a particular spot in the programming
menus.
A series of shortcut numbers takes you directly to the feature or code you want to change.
1. Enter User Programming.
Local Phone # + 9 + CODE
Remote Phone Access Dial the phone # + CODE + # + 9 + CODE
Touchpad 9 + CODE
2. Enter a programming command sequence.
Time
* + 020 + TTTT + #
Date * + 021 + DDMMYY + #
Regular User Codes Concord 4 Concord Express V4
User 00: * + 0 NNNN + # [* + NNNN + #]
User 01: * + 0 NNNN + # [* + NNNN + #]
User 02: * + 0 NNNN + # [* + NNNN + #]
(continues up to User 229) (continues up to User 15)
User 229: * + 0 NNNN + #
If using alphanumeric or fixed display touchpads, use A and B to scroll
through the code attributes and change them as required.
Partition Master Codes
(Concord 4 systems only) Partition 1: * + 0310 + NNNN + #
Partition 2: * + 0311 + NNNN + #
Partition 3: * + 0312 + NNNN + #
Partition 4: * + 0313 + NNNN + #
Partition 5: * + 0314 + NNNN + #
Partition 6: * + 0315 + NNNN + #
System Master Code * + 0320 + NNNN + #
Direct Bypassing Attribute * + 0 1 (off) or 2 (on) + # (nnn = user no.)
* + 1 (off) or 2 (on) + # (Concord Express V4)
Remote Access Attribute * + 0 1 (off) or 2 (on) + # (nnn = user no.)
* + 1 (off) or 2 (on) + # (Concord Express V4)
System Test Attribute * + 0 1 (off) or 2 (on) + # (nnn = user no.)
* + 1 (off) or 2 (on) + # (Concord Express V4)
Latchkey Report Attribute * + 0 1 (off) or 2 (on) + # (nnn = user no.)
* + 1 (off) or 2 (on) + # (Concord Express V4)
Partition Assign Attribute
(Concord 4 systems only)
* + 0 desired partitions 1-6 + # (nnn = user no.)
Downloading * + 041 + 1 (off) or 2 (on) + #
Touchpad Brightness * + 043 + 0 through 3 + #
Volume * + 044 + 0 through 7 + #
Voice Chime * + 045 + 1 (off) or 2 (on) + #