Concord 4 Series Security Systems
13
Even though reaching the time-out stops the sirens, the alarm will still be in progress until the
system is manually disarmed.
Access Codes
The system requires a valid access code before it will process most commands.
There is one
System Master code
which serves as the primary User Programming code for your
system. Only a very limited number of users will need to know this code.
Concord 4 systems have six
Partition Master codes
(one for each partition) which allow access
to system operations in their respective partitions. Concord Express V4 systems are single parti-
tion systems with no partition master codes.
Note
Partitions are individual security systems within the same control panel. Partitioned systems are typi-
cally used for large buildings with several entry/exit points and different access/operating hours. They
also work well for small strip malls, duplexes, and quad-homes where one control panel can provide
individual security for six different tenants.
Concord 4 systems have 230
Regular User codes
(000-229), while Concord Express V4 systems
have 16
Regular User codes
(00-15). These codes act like keys to arm and disarm the system. If
necessary, they can be assigned to neighbors, baby-sitters, or repair persons for temporary use.
Regular user codes can be changed in User Programming and are easily deleted from the system
when no longer necessary.
Programming Access Codes
The code you use to enter User Programming determines which features such as codes and code
attributes you’ll be able to change.
A user code can be given certain attributes that limit what the user can do within the system.
Attributes may be changed by you, or by a dealer over the phone using downloading software.
The User Sheets in Appendix A provide a location for you to record the actual user codes and the
attributes of each. If you need assistance in changing any code attributes contact your dealer.
Access Code Integrity
To preserve the integrity of your system, keep access codes confidential and delete extra codes as
soon as they are no longer needed.
Avoid using obvious code patterns such as
1234,
1111
,
2222
, etc.
System Master Code Privileges
Using the System Master code to enter User Programming lets you:
• Change the System Master code.
• Change or delete the Partition Master code in the current partition.
• Change or delete Regular User codes in the current partition.
The default System Master code is
1234
. It is important that you change this default and record
the new code on the User Sheets in Appendix A.
Partition Master Code Privileges
Using the Partition Master code to enter User Programming lets you:
• Change the Partition Master code in the current partition.
• Change or delete Regular User codes in the current partition.
There are no default Partition Master codes. Record all codes on the User Sheets in Appendix A.
Regular User Code Privileges
You cannot enter User Programming with a Regular User code.
The Touchpad Tamper Feature
The installer can program your system to activate a Police alarm in the case of possible touchpad
tampering.
