Concord 4 Series Security Systems
46
Accidental Smoke and Fire Alarms
To silence the alarms and reset the sensor:
1. Press CODE or
1
+
CODE
, once to silence the alarm.
2. Press
1
+
CODE
, again to reset the smoke alarm.
Smoke and fire panic alarms cannot be cancelled and are always reported to the central station.
If, after disarming the system once, the system still thinks a sensor is open, disarm the system
again.
In the event of an accidental smoke or fire alarm, follow these dealer instructions:
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
Dialer Abort
I have ____ seconds to cancel an accidental intrusion or auxiliary alarm before it is reported
to the central station.
Doors and Delay Time Settings
When the system is armed, enter and exit the premises only through designated delay doors.
Entry Delay Time:
The time allowed to enter the premises and disarm the system.
Exit Delay Time:
The time allowed to leave the premises after arming the system.
System Features
Door
Door Location
Ptn.
Entry Delay
Exit Delay
1
1
:
:
2
2
:
:
3
3
:
:
4
4
:
:
5
5
:
:
6
6
:
:
Feature
My system features include:
Quick Arm
Yes. Press the arming level desired.
No. Enter arming level, then access code.
Quick Exit
Yes. Press
D
and exit your armed premises through a delay door within 2
minutes.
No. I need to disarm my system in order to exit the premises.
Exit
Extension
Yes. If I re-enter the armed premises during the Exit Delay time, the panel
will restart the Exit Delay time.
No. If I re-enter the armed premises during the Exit Delay time, it will con-
tinue to count down and I must disarm the system.
Keyswitch
Arming
Yes. I can use a key to arm the system. The switch is located:
______________________________________________________________
No.
