CHAPTER 2: INSTALLATION
MECHANICAL INSTALLATION
345 TRANSFORMER PROTECTION SYSTEM – QUICKSTART GUIDE
19
Figure 2-5: Standard Panel mounting - Non-drawout
Figure 2-6: Mounting tabs (optional)
1.
From the front of the panel, slide the empty case into the cutout until the bottom tab
clicks into place (see above).
2.
From the rear of the panel screw the case into the panel at the 8 screw positions
shown above.
3.
If added security is required, bend the retaining "V"tabs outward, to about 90°. These
tabs are located on the sides of the case and appear as shown above.
The relay can now be inserted and can be panel wired.
BOTTOM TAB
“V” TABS
