12
5) Installing the Assembled Antenna:
a) Locate a position on the house that is far away from the power
lines. Refer to the
Important Safety Instructions.
b) Secure the
Mounting Bracket to the location selected for the
antenna. The
1/4 X 2” Lag Screws have been provided for some
installations.
c) Connect the
“J” mount to the Mounting Bracket (Fig. 5a) using the
M6 x 50mm Bolts, M6 Locking Nuts and M6 Washers.
Fig. 5a
d) Position the
J-Mount perpendicular to the ground
using a small level.
e) Slide the
Antenna onto the “J” Mount (Fig. 5b). Point
the small end of the antenna in the direction of
the broadcast towers you wish to receive. Tighten
the
Wing Nuts on the “U” Bolt when the antenna is in
the desired position.
Fig. 5b
